dmesg - 6770 glamor
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.15.0-rc7-24-desktop (root@bb) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #1 SMP PREEMPT Tue Jun 3 13:43:51 UTC 2014
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000de165fff] usable
BIOS-e820: [mem 0x00000000de166000-0x00000000de8ccfff] reserved
BIOS-e820: [mem 0x00000000de8cd000-0x00000000de958fff] usable
BIOS-e820: [mem 0x00000000de959000-0x00000000de9f5fff] ACPI NVS
BIOS-e820: [mem 0x00000000de9f6000-0x00000000def20fff] reserved
BIOS-e820: [mem 0x00000000def21000-0x00000000def21fff] usable
BIOS-e820: [mem 0x00000000def22000-0x00000000def64fff] ACPI NVS
BIOS-e820: [mem 0x00000000def65000-0x00000000df5e9fff] usable
BIOS-e820: [mem 0x00000000df5ea000-0x00000000df7f1fff] reserved
BIOS-e820: [mem 0x00000000df7f2000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H61M-ITX, BIOS P2.20A 02/06/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FF0000000 write-back
2 base 210000000 mask FF8000000 write-back
3 base 218000000 mask FFC000000 write-back
4 base 21C000000 mask FFE000000 write-back
5 base 21E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 256MB, type WB
reg 2, base: 8448MB, range: 128MB, type WB
reg 3, base: 8576MB, range: 64MB, type WB
reg 4, base: 8640MB, range: 32MB, type WB
reg 5, base: 8672MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 8176M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 512MB, type WB
reg 5, base: 8688MB, range: 16MB, type UC
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7e0-0x000fd7ef] mapped at [ffff8800000fd7e0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01d66000, 0x01d66fff] PGTABLE
BRK [0x01d67000, 0x01d67fff] PGTABLE
BRK [0x01d68000, 0x01d68fff] PGTABLE
init_memory_mapping: [mem 0x21ee00000-0x21effffff]
[mem 0x21ee00000-0x21effffff] page 2M
BRK [0x01d69000, 0x01d69fff] PGTABLE
init_memory_mapping: [mem 0x21c000000-0x21edfffff]
[mem 0x21c000000-0x21edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21bffffff]
[mem 0x200000000-0x21bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xde165fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xddffffff] page 2M
[mem 0xde000000-0xde165fff] page 4k
init_memory_mapping: [mem 0xde8cd000-0xde958fff]
[mem 0xde8cd000-0xde958fff] page 4k
BRK [0x01d6a000, 0x01d6afff] PGTABLE
init_memory_mapping: [mem 0xdef21000-0xdef21fff]
[mem 0xdef21000-0xdef21fff] page 4k
BRK [0x01d6b000, 0x01d6bfff] PGTABLE
init_memory_mapping: [mem 0xdef65000-0xdf5e9fff]
[mem 0xdef65000-0xdeffffff] page 4k
[mem 0xdf000000-0xdf3fffff] page 2M
[mem 0xdf400000-0xdf5e9fff] page 4k
init_memory_mapping: [mem 0xdf7f2000-0xdf7fffff]
[mem 0xdf7f2000-0xdf7fffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
RAMDISK: [mem 0x36d54000-0x376a1fff]
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DE9E7078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DE9F07C0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DE9E7178 009648 (v02 ALASKA A M I 00000022 INTL 20051117)
ACPI: FACS 0x00000000DE9F4080 000040
ACPI: APIC 0x00000000DE9F08D0 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DE9F0948 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000DE9F0990 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: AAFT 0x00000000DE9F09D0 0000EA (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DE9F0AC0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DE9F0AF8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DE9F0E68 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DE9F1818 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021effffff]
Initmem setup node 0 [mem 0x00000000-0x21effffff]
NODE_DATA [mem 0x21efe2000-0x21eff5fff]
[ffffea0000000000-ffffea00077fffff] PMD -> [ffff880216600000-ffff88021d7fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xde165fff]
node 0: [mem 0xde8cd000-0xde958fff]
node 0: [mem 0xdef21000-0xdef21fff]
node 0: [mem 0xdef65000-0xdf5e9fff]
node 0: [mem 0xdf7f2000-0xdf7fffff]
node 0: [mem 0x100000000-0x21effffff]
On node 0 totalpages: 2086946
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12406 pages used for memmap
DMA32 zone: 907398 pages, LIFO batch:31
Normal zone: 16072 pages used for memmap
Normal zone: 1175552 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s83264 r8192 d23232 u524288
pcpu-alloc: s83264 r8192 d23232 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2058391
Policy zone: Normal
Intel-IOMMU: enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Memory: 8140820K/8347784K available (5971K kernel code, 822K rwdata, 2772K rodata, 1308K init, 1316K bss, 206964K reserved)
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:712 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2993.256 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5986.51 BogoMIPS (lpj=2993256)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140214
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
Freeing SMP alternatives memory: 24K (ffffffff81c16000 - ffffffff81c1c000)
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-3330 CPU @ 3.00GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (23946.04 BogoMIPS)
devtmpfs: initialized
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 0x00000000DE87A018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x0000000000000000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 0x00000000DE87BA98 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x0000000000000000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DE87CC18 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: \_PR_.CPU4: failed to get CPU APIC ID.
ACPI: \_PR_.CPU5: failed to get CPU APIC ID.
ACPI: \_PR_.CPU6: failed to get CPU APIC ID.
ACPI: \_PR_.CPU7: failed to get CPU APIC ID.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7f0a000-0xf7f0a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7f08000-0xf7f083ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7f00000-0xf7f03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7f07000-0xf7f073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7f06000-0xf7f067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7f05000-0xf7f050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [1002:68ba] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf7e20000-0xf7e3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xf7e00000-0xf7e1ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa58] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7e40000-0xf7e43fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xf7d00000-0xf7d07fff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [mem 0xf7d00000-0xf7dfffff]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xde166000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde959000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdef22000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf5ea000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x100f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] could not be reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [io 0x0290-0x029f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xf0100000-0xf0100fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xf7d00000-0xf7dfffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 9528K (ffff880036d54000 - ffff8800376a2000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xda166000-0xde166000] (64MB) mapped at [ffff8800da166000-ffff8800de165fff]
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x15
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x15
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x15
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x15
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1402202520.290:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15918
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 41
ata2: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06180 irq 41
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06300 irq 41
ata6: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06380 irq 41
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f08000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.15.0-rc7-24-desktop ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f07000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.15.0-rc7-24-desktop ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 10
Loading compiled-in X.509 certificates
registered taskstats version 1
AppArmor: AppArmor sha1 policy hashing enabled
rtc_cmos 00:05: setting system clock to 2014-06-08 04:42:01 UTC (1402202521)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: ATA-8: SPCC Solid State Disk, S8FM06.5, max UDMA/133
ata2.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: configured for UDMA/133
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
scsi 1:0:0:0: Direct-Access ATA SPCC Solid State S8FM PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1 sdc4 sdc5
sd 4:0:0:0: [sdc] Attached SCSI disk
sda: sda1 sda3 sda4 sda5
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1308K (ffffffff81acf000 - ffffffff81c16000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 164K (ffff8800015d7000 - ffff880001600000)
Freeing unused kernel memory: 1324K (ffff8800018b5000 - ffff880001a00000)
emc: device handler registered
rdac: device handler registered
hp_sw: device handler registered
alua: device handler registered
systemd-udevd[146]: starting version 208
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (JUNIPER 0x1002:0x68BA 0x1043:0x03F8).
[drm] register mmio base: 0xF7E20000
[drm] register mmio size: 131072
ATOM BIOS: 68BA.12.20.0.55.AS01.U126
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 4076584 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading JUNIPER Microcode
[drm] Internal thermal controller with fan control
== power state 0 ==
ui class: none
internal class: boot
caps: video
uvd vclk: 0 dclk: 0
power level 0 sclk: 85000 mclk: 120000 vddc: 1250 vddci: 0
power level 1 sclk: 85000 mclk: 120000 vddc: 1250 vddci: 0
power level 2 sclk: 85000 mclk: 120000 vddc: 1250 vddci: 0
status: c r b
== power state 1 ==
ui class: performance
internal class: none
caps: single_disp video
uvd vclk: 0 dclk: 0
power level 0 sclk: 15700 mclk: 30000 vddc: 950 vddci: 1100
power level 1 sclk: 50000 mclk: 120000 vddc: 1125 vddci: 1100
power level 2 sclk: 85000 mclk: 120000 vddc: 1250 vddci: 1100
status:
== power state 2 ==
ui class: none
internal class: uvd
caps: video
uvd vclk: 50000 dclk: 40000
power level 0 sclk: 40000 mclk: 90000 vddc: 950 vddci: 1100
power level 1 sclk: 40000 mclk: 90000 vddc: 950 vddci: 1100
power level 2 sclk: 40000 mclk: 90000 vddc: 950 vddci: 1100
status:
== power state 3 ==
ui class: performance
internal class: none
caps: video
uvd vclk: 0 dclk: 0
power level 0 sclk: 40000 mclk: 120000 vddc: 950 vddci: 1100
power level 1 sclk: 50000 mclk: 120000 vddc: 1125 vddci: 1100
power level 2 sclk: 85000 mclk: 120000 vddc: 1250 vddci: 1100
status:
== power state 4 ==
ui class: none
internal class: acpi
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 15700 mclk: 30000 vddc: 950 vddci: 1100
power level 1 sclk: 15700 mclk: 30000 vddc: 950 vddci: 1100
power level 2 sclk: 15700 mclk: 30000 vddc: 950 vddci: 1100
status:
== power state 5 ==
ui class: none
internal class: uvd_mvc
caps: video
uvd vclk: 70000 dclk: 56000
power level 0 sclk: 85000 mclk: 120000 vddc: 1250 vddci: 1100
power level 1 sclk: 85000 mclk: 120000 vddc: 1250 vddci: 1100
power level 2 sclk: 85000 mclk: 120000 vddc: 1250 vddci: 1100
status:
xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.15.0-rc7-24-desktop xhci_hcd
usb usb3: SerialNumber: 0000:04:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.15.0-rc7-24-desktop xhci_hcd
usb usb4: SerialNumber: 0000:04:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
random: nonblocking pool is initialized
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880212317c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880212317c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000511c418
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 47 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
usb 3-2: new low-speed USB device number 2 using xhci_hcd
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD5
[drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DVI-I-1
[drm] HPD1
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
switching from power state:
ui class: none
internal class: boot
caps: video
uvd vclk: 0 dclk: 0
power level 0 sclk: 85000 mclk: 120000 vddc: 1250 vddci: 0
power level 1 sclk: 85000 mclk: 120000 vddc: 1250 vddci: 0
power level 2 sclk: 85000 mclk: 120000 vddc: 1250 vddci: 0
status: c b
switching to power state:
ui class: performance
internal class: none
caps: single_disp video
uvd vclk: 0 dclk: 0
power level 0 sclk: 15700 mclk: 30000 vddc: 950 vddci: 1100
power level 1 sclk: 50000 mclk: 120000 vddc: 1125 vddci: 1100
power level 2 sclk: 85000 mclk: 120000 vddc: 1250 vddci: 1100
status: r
[drm] fb mappable at 0xE045E000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.38.0 20080528 for 0000:01:00.0 on minor 0
xor: automatically using best checksumming function:
avx : 23328.000 MB/sec
raid6: sse2x1 8191 MB/s
raid6: sse2x2 10125 MB/s
tsc: Refined TSC clocksource calibration: 2993.201 MHz
usb 3-2: New USB device found, idVendor=093a, idProduct=2510
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Optical Mouse
usb 3-2: Manufacturer: PixArt
usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1c.5/0000:04:00.0/usb3/3-2/3-2:1.0/0003:093A:2510.0001/input/input5
hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:04:00.0-2/input0
raid6: sse2x4 11410 MB/s
raid6: using algorithm sse2x4 (11410 MB/s)
raid6: using ssse3x2 recovery algorithm
Btrfs loaded
usb 1-1.1: new low-speed USB device number 3 using ehci-pci
usb 1-1.1: New USB device found, idVendor=1a2c, idProduct=0021
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: USB Keykoard
usb 1-1.1: Manufacturer: USB
input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:1A2C:0021.0002/input/input6
hid-generic 0003:1A2C:0021.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1a.0-1.1/input0
BTRFS: device fsid 85a36d5e-57ce-4446-9c27-fb4f07fef095 devid 1 transid 98632 /dev/sda5
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: acl,user_xattr
Switched to clocksource tsc
EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr
hid-generic 0003:1A2C:0021.0003: usb_submit_urb(ctrl) failed: -1
hid-generic 0003:1A2C:0021.0003: timeout initializing reports
input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:1A2C:0021.0003/input/input7
hid-generic 0003:1A2C:0021.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1a.0-1.1/input1
usb 1-1.2: new low-speed USB device number 4 using ehci-pci
usb 1-1.2: New USB device found, idVendor=09da, idProduct=000a
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: PS/2+USB Mouse
usb 1-1.2: Manufacturer: A4Tech
input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:09DA:000A.0004/input/input8
a4tech 0003:09DA:000A.0004: input,hidraw3: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1a.0-1.2/input0
usb 2-1.2: new high-speed USB device number 3 using ehci-pci
usb 2-1.2: New USB device found, idVendor=0930, idProduct=6545
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2: Product: TransMemory
usb 2-1.2: Manufacturer: TOSHIBA
usb 2-1.2: SerialNumber: 0E60BC707311B943
systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Set hostname to .
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
LVM: Logical Volume autoactivation enabled.
LVM: Activation generator successfully completed.
systemd[1]: Starting Collect Read-Ahead Data...
systemd[1]: Starting Replay Read-Ahead Data...
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting LVM2 metadata daemon socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Create dynamic rule for /dev/root link...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-readahead[281]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
systemd-journald[284]: Vacuuming done, freed 0 bytes
EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
systemd-udevd[325]: starting version 208
ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
AVX version of gcm_enc/dec engaged.
input: PC Speaker as /devices/platform/pcspkr/input/input9
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140214/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140214/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140214/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140214/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
usb-storage 2-1.2:1.0: USB Mass Storage device detected
scsi6 : usb-storage 2-1.2:1.0
usbcore: registered new interface driver usb-storage
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0: irq 49 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c78000, 00:25:22:de:9f:61, XID 0c900800 IRQ 49
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 51 for MSI/MSI-X
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
sound hdaudioC0D0: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x1e/0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Mic=0x18
sound hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
Adding 2098172k swap on /dev/sdb2. Priority:-1 extents:1 across:2098172k SSFS
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: acl,user_xattr,discard
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
systemd-udevd[339]: renamed network interface eth0 to enp3s0
scsi 6:0:0:0: Direct-Access TOSHIBA TransMemory 5.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdd] 1956864 512-byte logical blocks: (1.00 GB/955 MiB)
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdd] No Caching mode page found
sd 6:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 6:0:0:0: [sdd] Attached SCSI removable disk
BTRFS info (device sda5): disk space caching is enabled
BTRFS: has skinny extents
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: acl,user_xattr
systemd-journald[284]: Received request to flush runtime journal from PID 1
nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290
r8169 0000:03:00.0 enp3s0: link down
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
IPv6: ADDRCONF(NETDEV_UP): tap0: link is not ready
Bridge firewalling registered
device enp3s0 entered promiscuous mode
device tap0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
r8169 0000:03:00.0 enp3s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
br0: port 1(enp3s0) entered forwarding state
br0: port 1(enp3s0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
NET: Registered protocol family 17
GpuTest[3839]: segfault at 2d0 ip 00007f97d54f0471 sp 00007fff0e51ea00 error 4 in libpthread-2.18.so[7f97d54e7000+18000]
GpuTest[3871]: segfault at 2d0 ip 00007f48a7cda471 sp 00007fffde668c00 error 4 in libpthread-2.18.so[7f48a7cd1000+18000]
GpuTest[3900]: segfault at 2d0 ip 00007fb132df4471 sp 00007fff7dba6b00 error 4 in libpthread-2.18.so[7fb132deb000+18000]
GpuTest[4784]: segfault at 2d0 ip 00007f9044afc471 sp 00007fff8af0cad0 error 4 in libpthread-2.18.so[7f9044af3000+18000]
GpuTest[4836]: segfault at 2d0 ip 00007f9670280471 sp 00007fff085b2920 error 4 in libpthread-2.18.so[7f9670277000+18000]
GpuTest[4865]: segfault at 2d0 ip 00007fafa0e04471 sp 00007fff492133d0 error 4 in libpthread-2.18.so[7fafa0dfb000+18000]